Update Nexus 6 with Android 5.1.1 Lollipop OTS Firmware [ Download links and Easy guide how to Install ]

0
35
Google Nexus Android 5.1.1 Update

Nexus 6 is the latest Google Android 5.1.1 device unveiled. The latest update comes with the build number LMY47Z for the Sprint, US Cellular and the international variants with the T-Mobile variant is receiving the update as LYZ28E. Currently, the update is rolling out over-the-air weighing around 120 MB and comes with few security updates. Its a minor update from Google which brings the latest update to Android ecosystem on Nexus 6.

As you know the OTA updates take time to reach the users, so below is the tutorial how to manually update the OTA firmware on your Nexus 6. Firstly check that you are on the LMY47D build, Sprint, US Cellular and the international variants, while the T-Mobile US Variant users should on LMY47M before you flash this incremental update. Follow the simple instructions below to flash the latest update on your Nexus 6 from the OTA firmware from the required files below.

Prerequisites

  •  Install proper drivers for your Nexus on your PC. If you don’t have one, check our driver’s page here.
  •  Ensure that you have USB Debugging enabled from settings.
  •  Make sure you’re on stock firmware without any modifications to avoid chances of boot loops.
  •  You need the latest version of ADB installed on your computer. You can grab the verified ZIP package by clicking here.

Firmware Downloads Required 

LMY47Z (Sprint, US Cellular, International)

LYZ28E (T-Mobile US)

How to Update Nexus 6 with Android 5.1.1 Lollipop OTA firmware
1. Make sure you have the latest ADB version installed on your computer. If not, quickly download the ZIP file from above and extract it on your PC.
2. Download the firmware according to your Nexus 6 variant and rename the downloaded file to update.zip for your convenience.
3. Place the update.zip file in the same folder where you have extracted the ADB files on your PC.
4. Connect your Nexus 6 to the PC and make sure the device is detected by the PC
5. Navigate to the folder where you’ve extracted the ADB and Fastboot files and open a command prompt by pressing Shift + Right click on any empty space inside the folder, and select Open command window here from the context menu.
6. Reboot your device into recovery mode. To do this, simply type in the following command in the command prompt:

adb reboot recovery

7. Once your Nexus device boots into the Recovery mode, press Volume Up for a second, and release it. Now you’ll be able to see the recovery menu.
8. Select “apply update from adb” from the different options.
9. On your command prompt window on the Computer, type in the following code :

adb sideload Update.zip

10. Wait until the flashing process is completed and then you can disconnect your device from the PC.

Reboot the device and wait until the device completely boots up. Enjoy the latest Android 5.1.1 on your Nexus.

LEAVE A REPLY

Please enter your comment!
Please enter your name here